自動掛渣去除機，切割掛渣去除機，鋼板掛渣清除機

GDM-165S自動掛渣去除機產(chǎn)品簡介：

 這是一款經(jīng)濟型的單面掛扎去除機，加工速度在2.0米~4米/分鐘，可以有效的去除鋼板切割下來的掛渣。

GDM-165S自動掛渣去除機動力參數(shù)：

磨削電機功率.................................................................................................3750W*1

進料電機功率................................................................................................功率750W

氣源（壓縮空氣）..........................................................................................0.5MPa

風機風量..........................................................................................................1*25m3/min

所需電源..........................................................................................................AC380V 50HZ

凈       重 ..........................................................................................................1700Kg

GDM-165S經(jīng)濟型掛渣去除機加工能力：

加工板寬.......................................................................................................650mm

加工板厚.......................................................................................................9~60mm

加工板長........................................................................................................>170mm

臺面高度........................................................................................................900mm

臺面尺寸........................................................................................................675*1900mm（設備工作臺總長度）

去掛渣速度.....................................................................................................2~4.0m/min

一次進給完成...............................................................................................下兩面

版權所有：麥尼菲克機械制造（昆山）有限公司

坡口機&銑邊機品牌：GIRET捷瑞特

www.776cq.com